Draft Beer Towers Custom Tower available, just show us your design and let us build the tower that's just right for your business. Estimate for Installation of Parts and Labor This
agreement is entered into in South Houston, Texas made between
___________________ (hereafter called “Client”) located at
address: _______________________________ and Carbonics, INC. (hereafter called “Carbonics”) located at 506 Nebraska St, South Houston, Texas 77587. Carbonics agrees to provide parts and labor based on the following terms and conditions:
|
| Please understand that all prices are for estimate purposes and may change. Sometimes a vendor will discontinue a particular design. We make all possible attempts to keep this list accurate, but until you receive an actual quote this price isn't firm. | ||
 | Wall-Mounted Panel 304 Grade Stainless Steel $735.75 2-Faucet Glycol-Chilled $830.25 6-Faucet glycol $1073.25 8-Faucet glycol 30" inset portion is 25"wide, 4" tall, 5" deep, except main cylindrical column is 21" deep $1788.75 12-Faucet Air-Cooled 36" Wide $1957.50 12-Faucet Glycol-Chilled | FAN required |
 Economy version  Premium version + adds all 304 grade SS internals and copper Glycol lines aluminum cooling block and better insulation | Pipeline Polished Stainless Steel, Glycol-Chilled. (all sizes listed) $1250 6-Faucet WIDE Version (38 3/16" width) $1425 8-Faucet (35.5" width standard) $1675 10-Faucet (41 5/8" width standard) $1825 12-Faucet (47 5/8" width standard) $2125 14-Faucet (61" width) 3" diameter pipe, height to faucet 14 5/8" Available standard or Wide (3" FtF or 4 5/16" FtF) Available in Short leg (changes Clearance to 10 5/8") *
Available in "Premium" with all 304 grade Stainless Steel tubing with
copper Glycol lines for $250-300 extra depending on number of faucets | Can be position horizontally coming OUT from the wall of the cooler, with all the faucets turned 90 degrees.
FAN required |
  | Pipeline (Brushed Copper Finish)
20-Faucet $5360 as of 8/2018 8-Faucet $3064.00 as of 9/2018 (8-faucet matching drip tray $1,150.00 (price may vary on this custom tower) (extra lead-time needed for powder coating) | FAN Required |
 | Pipeline Brass PVD Finish | |
 | Arched Pipe $1710 8-Faucet, 43 3/5" width (*24" DT) $1925 10-Faucet, 49 1/2" width (*30" DT) $2220 12-Faucet, 55 3/7" width (*36" DT) Brass Body with a Stainless steel exterior and shanks. Cool-Tap technology (sealed, insulated, aluminum cold plate on shanks) 3/8" copper glycol lines (air cooled available) Height to Faucet 11.75" Pipe diameter 4.125" width for 8-faucet = 37.5" Finishes: Brushed or polished stainless steel | FAN required |
 | Bridge Tower $1550 8-Faucet, 39.5" width (*24" DT) $1780 10-Faucet, 45 7/16" width (*30" DT) $1985 12-Faucet 51 3/8" width (*36" DT) Brass and Stainless Steel with SS shanks and Faucets. Cool-Tap technology (sealed, insulated, aluminum cold plate on shanks) 3/8" copper glycol lines (air cooled available) Height to Faucet 12 3/8" Column diameter 5.125" Faucets are 3" Center to Center C2C Finishes: Brushed or Polished Stainless Steel | FAN required |
 | Drip Trays (DT) Stainless Steel Surface Trays: 12" X 7" X 3/4" height - $70 (2-3 faucets) 15" X 5.25" X 3/4" height - $75 16" X 8" X 3/4" height - $80 (4 faucets) 18" X 8" X 3/4" height - $215 18" X 8" X 3/4" height + Glass Rinser - $250 20" - $150 (4-5 faucets) 24" X 5.25" X 3/4" height - $155 24" - $160 (5-6 faucets) 32" - $175 (8 faucets) | |
 | Flush Mounted Drain Pans extra $$ + up to 2 weeks manufacture time | |
 | Wall Mount Long Draw Glycol Chilled Panel | |
 | Wall Mount Drain with Shank opening Short-Draw applications only $72.50 1-Faucet 6" $96.45 2-Faucet 12" $100.91 3-Faucet 12" $213.35 4-Faucet 16" $272.80 5-Faucet 19" $340.55 6-Faucet 22" 12.5" height. Front of drain pan is 5" from wall. | |
 | Custom Graphics | |
 | Growler Station (panel) 6" CTC Faucets 16.5" Clearance under faucets | |
 | Faucets Faucets can come in Stainless Steel, 304 Grade Stainless (for wine), or in chrome plated Brass for extra economy. | |
 powder coated black iron example | Finishes: Most towers can be finished with polished stainless steel, or brushed stainless steel. Some towers can have a Brass/PVD finish (usually a few hundred $$ more)
Any Tower could be powder-coated to achieve the exact look you want. Hundreds of powdercoating colors and textures to choose from. (see pic) | |
 |  | |
Beer Systems Hardware Author: Sam This is the backbone of your Draft Beer System. A Carbonics Inc installed system is guaranteed to pour a perfect beer! Listed below you can find some of the equipment (and cost) available to build your cost saving Draft Beer System: |
 If your gas blend is not right you will have eiher flat beer or foamy beer. Both of which cost you income! | Carbonics Draft Beer Equipment Purchase
or Lease your equipment (see bottom for lease info) Carbonics, Inc. guarantees a perfect pour for every line, saving you $$ on loss of product. No wasted foam, no overpours, no waiting for the beer to "settle". Talk to us about your equipment options: 713-944-7900 |  Colder beer loses all taste. Warmer beer is unpleasant and more likely to foam! |
 Elements of a Direct Draw System |  Elements of a Long Draw System | Direct Draw is directly through the cooler wall. It is the cheapest, simplest, and utilizes nothing but CO2 to deliver perfect pours Long Draw
involves pumping or pushing the beer through insulated "trunk" line 25'
or more from the cooler to the dispense tower. You'll need either
a gas blender/nitrogen generator setup or beer pumps to achieve this.
You'll also need a Glycol chiller to keep the beer cold all the
way to the tower. |
 | High Powered Fan Blower Rated for 24/7 continuous use inside a cooler. Blows cold air through a short-run draft beer system or tower. Used for Air-cooled systems $285
| |
 | Gas Blender Mixes
CO2 and N2 to the perfect Blend. Eliminates need for beer pumps in medium distance draft systems. Blends gas on the spot for special blends like Guinness or other nitrogenated beers. Single Mix Blender - $950 Dual Mix Blender - $1150 | |
 | Nitrogen Generator (with dual blender) Dispenses up to 7 kegs/hour or 16.8 pints/min (5 hr. surge) N2 Purity 99.8% Technology: Dual Bed PSA N2 Storage Tank (Provided): 28 Gallon CO2 Gas Requirement: 80 to 85 psi Blender: McDantim Trumix™ Electrical: 110 VAC, 18 Amps Compressor: Integral/Oil-Free Ambient Temperature: 35 to 105° F Size (N2 Generator): 30"H x 13"W x 10"D (85lbs) $5300.00 | |
 | Wall Panel - Economy (short runs) $130 - 2 product
$170 - 3 product
$200 - 4 product | |
 | Wall Panel - Short (CO2) 4 products 4 line brackets, 4 regulators w/ shutoff, 4 sets of hose Good for short draw systems $178.35 - 2 products $255.00 - 3 products $330.00 - 4 products | |
 | Keg Shelves top shelf hold 15 lbs / square foot 1 3/4" square tubing (adjustable shelves) 1 5/16" round heavy wall tubing posts 76" height, 20" depth 10 keg - $1026 - 93" L X 76" H X 20" depth 8 keg - $775 - 80" L X 68" H X 17" depth | |
 | Keg Dolly | |
 | Miscellaneous Parts There
are hundreds of fittings, clamps, brackets, ties, splicers, adapters,
types of tapes, types of insulation, sealers, gap fillers, etc that are used in every installation. *Pricing for estimates is an educated estimate, not an exact figure unless specified as a "quote".
Not having product, power & water at the time of installation will result in additional trip charges. Estimated installation does not include electrical, plumbing, tubing chase core drilling, or cutting of specialty countertops. No installation work will begin if a responsible party (decision maker) is not available on site. End user is responsible for adequate ventilation & air circulation of all air cooled equipment per manufacturer's specifications. | |
 | Labor We
guarantee our work and provide free training for your staff. Our crews are bonded, certified Draft Beer Specialists who receive continuing education to insure they remain on the cutting edge of Draft technology and practices. Our Draft Specialists will insure your system operates efficiently, saving you money on loss and making for happy customers. | |
 |  |