Carbonics troubleshooting guide for soda dispenser systems

Troubleshooting

Let's keep it simple, if your sodawater drink is flat it is due to one of a few possibilities:

1. You are out of Gas.
Check your CO2 tank and make sure it is connected, full, and turned on!

2. You are out of ice.
The soda water and the syrup must be cold. (38 degrees max)

3. You are under pressurized.
Pressure to Carbonator should be approximately 90-105 PSI

4. Your Carbonator filled up with water when you ran out of CO2.

To correct this run the sodawater until you hear the Carbonator start running.

The device above is one example of a Carbonator.

It must be plugged in and have access to co2 and water.

If none of these things fix the problem, then you should get SERVICE.